Specifications
- Mfr Part Number: I350T2V2
- Ethernet Features:
- IEEE 802.3 auto-negotiation
- 1Gb/s Ethernet IEEE 802.3, 802.3u, 802.3ab PHY specifications Compliant
- Integrated PHY for 10/100/1000 Mb/s for multispeed, full and half-duplex
- IEEE 802.3x and 802.3z compliant flow control support with software-controllable Rx thresholds and Tx pause frames
- Automatic cross-over detection function (MDI/MDI-X)
- IEEE 1588 protocol and 802.1AS implementation
- Power Management and Efficiency:
- <1W S0-Max (state) 1000BASE-T Active 90oC (mode), <400mW S0-Typ (state) 100BASE-T Active (mode)
- IEEE802.3az – Energy Efficient Ethernet (EEE)
- DMA Coalescing
- Smart Power Down (SPD) at S0 no link / Sx no link
- Active State Power Management (ASPM) Support
- LAN disable function
- Full wake up support
- Advanced Power Management (APM) Support (formerly Wake on LAN)
- Advanced Configuration and Power Interface (ACPI) specification v2.0c
- Magic Packet wake-up enable with unique MAC address
- ACPI register set and power down functionality supporting D0 and D3 states
- MAC Power Management controls
- Low Power Link Up – Link Speed Control
- Power Management Protocol Offload (Proxying)
- Latency Tolerance Reporting (LTR)
- I/O Virtualization Features:
- Eight transmit (Tx) and receive (Rx) queue pairs per port
- Flexible Port Partitioning – 32 Virtual Functions on Quad-port or 16 Virtual Functions on Dual-port
- Support for PCI-SIG SR-IOV specification
- Rx/Tx Round-Robin Scheduling
- Traffic Isolation
- Traffic Steering
- VM to VM Packet forwarding (Packet Loopback)
- MAC and VLAN anti-spoofing
- Malicious driver detection
- Storm control
- Per-pool statistics, offloads, and jumbo frames support
- Independent Function Level Reset (FLR) for Physical and Virtual Functions
- IEEE 802.1q Virtual Local Area Network (VLAN) support with VLAN tag insertion, stripping and packet filtering for up to 4096 VLAN tags
- IEEE 802.1q advanced packet filtering
- Mirroring rules
- Support for Simple VEPA
- VF Promiscuous modes
- Stateless Offloads/Performance Features:
- TCP/UDP, IPv4 checksum offloads (Rx/ Tx/Large-send); Extended Tx descriptors for more offload capabilities
- IPv6 support for IP/TCP and IP/UDP receive checksum offload
- Tx TCP segmentation offload (IPv4, IPv6)
- Transmit Segmentation Offloading (TSO)
- Interrupt throttling control
- Legacy and Message Signal Interrupt (MSI) Modes
- Message Signal Interrupt Extension (MSI-X)
- Intelligent interrupt generation
- Receive Side Scaling (RSS) for Windows environment Scalable I/O for Linux environments (IPv4, IPv6, TCP/UDP)
- Support for packets up to 9.5K Bytes (Jumbo Frames)
- Low Latency Interrupts
- Header/packet data split in receive
- PCIe v2.1 TLP Processing Hint Requester
- Descriptor ring management hardware for Transmit and Receive
- Remote Boot Option Features:
- Preboot eXecution Environment (PXE) flash interface support
- Intel Ethernet iSCSI Remote Boot for Windows, Linux, and VMware
- Intel Boot Agent software – Linux boot via PXE or BOOTP, Windows Deployment Services, or UEFI
- Manageability Features:
- Management Component Transport Protocol (MCTP)
- Firmware Based Thermal Management
- IEEE 802.3 MII Management Interface
- MAC/PHY Control and Status
- Watchdog timer
- Extended error reporting
- Controller Memory Protection
- Adapter Product Features:
- Plug and play specification support
- Intel I/O Acceleration Technology (Intel I/OAT)
- Ships with full-height bracket installed; low-profile bracket included in package
- Cable distance
- Standards: IEEE 802.3/10BASE-T, 100BASE-TX, 1000BASE-T
- Controller Processor: Intel Ethernet Controller I350
- Connectors: RJ45 (Copper)
- Data Rate: Per port 10/100/1000 Mbps
- Cable Medium: Copper
- Cabling Type: Cat 5 up to 100m
- Bracket Height: Low Profile and Full Height
- Bus Type: PCI-Express 2.1 (5.0 GT/s)
- Bus Width: PCI-Express x4; operable in x4, x8 and x16 slots
- Interrupt Levels: INTA, INTB, INTC, INTD, MSI, MSI-X
- Power Consumption: 4.4W Typical
- Certifications: FCC B, UL, CE, VCCI, BSMI, CTICK, KCC
- Dimensions (WxLxH):
- Full-height End Bracket: 2.710 x 5.330 x 4.725 inch / 6.89 x 13.54 x 12.00 cm
- Low-profile End Bracket: 2.710 x 5.330 x 3.117 inch / 6.89 x 13.54 x 7.92 cm
Reviews
There are no reviews yet.