Specifications
- Mfr Part Number: EJ1600-V2-US
- Hardware:
- Host Interface: Three SAS (one input, one output, one reserved) 12Gbps for each controller, 4x port
- Hard Drive: 16x 3.5″ SAS12/6Gb/s, hard drive or 2.5″ SAS SSD
- LED Indicators:
- System Power LED (Green): on/off
- System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged
- LCD Status Display (Two-digit number): Status of JBOD connection
- Buttons: Power / Reset
- Sound Level: 53.5 db(A)
- Software:
- Expansion Enclosure Management:
- The functions listed below are managed via the QNAP QES operating system
- Support for hard disk’s S.M.A.R.T. capacity
- RAID expansion enclosure LED identifier
- Location indication of RAID expansion enclosure
- Location indication of hard disks on RAID expansion enclosure
- Smart fan control
- In-band firmware update
- The disks, RAID Groups, storage pools, and volumes in the RAID expansion enclosures are configured via the QES operating system
- Upto 1PB Single Volume
- Support for multiple RAID groups in a storage pool to ensure data safety
- Online storage pool expansion
- Online volume expansion
- Block-based iSCSI LUN
- Support for thin-provisioned volume with space reclamation
- Support for thin-provisioned iSCSI LUN with space reclamation
- High Availability Based On Dual Active Controller / Dual Loop:
- Superior High Availability
- Dual controller, dual-loop architecture to tolerate the failure of a single node
- Dual back-end IO paths (dual controller configuration) Topology:
- Single controller, single
- Single controller, multiple path, loop
- Dual-controller, single path
- Dual-controller, multiple path, loop
- Scalability
- Support disks up to 16
- Support cascade JBOD configuration to connect more JBODs, up to 6 sets
- Superior FRU Design
- Hot swappable PSU module, disks and controller module, for easier maintenance and deployment Dual Slim type PSU module
- Expansion Enclosure Management:
- Form Factor: 3U Rackmount
- Power Supply: Redundant/ Hot Swap ATX Power Supply, 450W, 90-240Vac, 50-60Hz
- Power Consumption: Operating Mode, Typical – 344.19 W
- Dimensions (WxDxH): 17.57 x 24.33 x 5.20 inch
- Weight: 53.15 lbs
Reviews
There are no reviews yet.