Specifications
- Mfr Part Number: ATX-400PN-B204
- Features
- 20/24pin Main Power connector; SATA connector
- Complied with ATX12V 2.0 standard
- High efficiency and reliability
- Remote On/Off function
- Internal 12V DC 120mm Ball Bearing fan included
- Noise Killer (Thermal fan speed control function)
- Low noise and ripple
- Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settable power shut down
- Approved by UL 60950, IEC 60950, TUV EN60950, NEMKO (CB Report)
- Input:
- Input Range: 100 ~ 132 Vrms or 200 ~ 264 Vrms, Manual selection
- Frequency: 47 ~ 63 Hz
- Input Current: 8.5A (RMS) @ 115Vrms/60Hz, 5A (RMS) @ 230Vrms/50Hz
- Inrush Current: 100A Max cold start, 120A Max warm start measured at 264Vrms/50Hz
- Output:
- Total Watts: 400W
- +3.3V and +5V total output not exceed 150W
- When +3.3V is load to 30A, the +5V maximum load is 10A
- When +3.3V is load to 3.0A, the +5V maximum load is 28A
- +12V1DC, 12V2DC total power not exceed 348W
- +3.3V, +5V, +12V1DC, and +12V2DC total output not exceed 385W
- Dielectric Withstand: Input to frame ground 1800V AC for 1 second
- Efficiency: 70% minimum measured at nominal AC main voltage and frequency with maximum loads on all outputs
- Rise Time: Less than 20ms on all outputs
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Not exceed 3.5mA
- MTBF: 100,000 hours on maximum load at +25°C
- Dimension (WxLxH): 6 x 5.5 x 3.4 inch / 150 x 140 x 86 mm
Reviews
There are no reviews yet.