Specifications
- Mfr Part Number: AOC-MHIBF-M2Q2GM-O
- Add-on Card: The Ultimate InfiniBand FDR Adapter, in Supermicro Super I/O Module (SIOM) Form Factor
- Key Features:
- Super I/O Module (SIOM) Form Factor
- Mellanox ConnectX-3 Pro InfiniBand FDR controller
- Dual QSFP connector model
- Up to 56Gbps InfiniBand or 40Gbps Ethernet
- Virtual Protocol Interconnect (VPI)
- VXLAN and NVGRE
- Intel i350 GbE controller
- Dual RJ45 Connectors
- NC-SI for Remote Management
- Asset Management Features with thermal sensor
- RoHS compliant 6/6
- Compliance: RoHS: RoHS Compliant 6/6, Pb Free
- General:
- Super I/O Module (SIOM) Form Factor
- Mellanox ConnectX-3 Pro FDR controller
- Intel i350 GbE controller
- Dual QSFP ports and Dual RJ45 port
- Cables Support:
- InfiniBand FDR: QSFP 56Gbps Copper cables
- GbE: RJ45 Category 5/5e up to 100m
- ​Power Consumption: Maximum 11W
- Operating Conditions:
- ​Operating temperature: 0°C to 55°C (32°F to 131°F)
- Storage temperature: -40°C to 70°C (-40°F to 158°F)
- Storage humidity: 90% non-condensing relative humidity at 35°C
- Physical Dimensions (L x H): Card PCB dimensions: 92mm (3.62in) x 87.1mm (3.43in) (W x D)
- Supported Platforms:
- ​Supermicro motherboards with Super I/O Module slot
- Supermicro server systems with Super I/O Module slot
- Compatibility Matrices:
- ​Servers: Supermicro Servers with SIOM support
- Cables & Transceivers: Networking Cables & Transceivers
- InfiniBand FDR QSFP Specifications:
- ​Connectivity:
– Interoperable with InfiniBand or 40GbE switches– Passive copper cable with ESD protection - InfiniBand:– IBTA Specification 1.2.1 compliant– Hardware-based congestion control– 256 to 4Kbyte MTU, 2GB messages
- Enhanced InfiniBand:
– Hardware-based reliable transport
– Collective operations offloads
– Hardware-based reliable multicast
– Extended Reliable Connected transport
– Enhanced Atomic operations - Ethernet:
– IEEE 802.3ba 40 Gigabit Ethernet– IEEE Std 802.3ad Link Aggregation– IEEE Std 802.3az Energy Efficient Ethernet– IEEE Std 802.1Q, .1P VLAN tags and priority– IEEE P802.1bb D1.0 Priority-based Flow Control– IEEE 1588
– Jumbo frame support (9600B) - Hardware-based I/O Virtualization:
– Single Root IOV
– Address translation and protection
– Dedicated adapter resources
– Multiple queues per virtual machine
– Enhanced QoS for vNICs
– VMware NetQueue support - Overlay Networks: VXLAN and NVGRE
- Additional CPU Offloads:– RDMA over Converged Ethernet– TCP/UDP/IP stateless offload– Intelligent interrupt coalescence
- FlexBoot Technology:– Remote boot over InfiniBand– Remote boot over Ethernet– Remote boot over iSCSI
- Protocol Support:– Open MPI, OSU MVAPICH, Intel MPI, MS– MPI, Platform MPI– TCP/UDP, EoIB, IPoIB, RDS– SRP, iSER, NFS RDMA– uDAPL
- Operating System Support:– Citrix XenServer 6.1– RHEL/CentOS 5.X and 6.X, Novell SLES10 SP4; SLES11 SP1, SLES 11 SP2, OEL, Fedora 14, 15, 17, Ubuntu 12.04
– Windows Server 2008/2012/2012 R2– FreeBSD– OpenFabrics Enterprise Distribution (OFED)– OpenFabrics Windows Distribution (WinOF)– VMware ESXi 4.x and 5.x
- ​Connectivity:
- GbE RJ45 Specifications:
- ​ Ethernet and Virtualization Features:– PC-SIG SR-IOV support– Jumbo Frames support
- Performance and Efficiency Features:– Energy Efficient Ethernet (EEE)– TCP/UDP, IPv4 and IPv6 checksum offloads to improve CPU usage– Low Latency Interrupts
- Management Features:– Asset Management support on Supermicro platforms– Preboot eXecution Environment (PXE) support– iSCSI Remote Boot Support– NC-SI for Remote Management via Intel i350 GbE RJ45 connector
- Operating System Support:– Windows Server 2012 R2, 2012, 2008 R2 (x64 Edition)– Windows 8.1, 8, 7 (x64 Edition)– RedHat Linux– SUSE Linux– FreeBSD– UEFI– VMware
Reviews
There are no reviews yet.